EasyManuals Logo

D-Link GO-RT-N300 User Manual

D-Link GO-RT-N300
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
19D-Link GO-RT-N300 User Manual
Section 3 - Conguration
DHCP stands for Dynamic Host Control Protocol. The GO-RT-N300 has a built-in DHCP server. The DHCP Server will automatically
assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically. When you turn your computers on, they will automatically load
the proper TCP/IP settings provided by the GO-RT-N300. The DHCP Server will automatically allocate an unused IP address
from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.
Choose the DHCP Server option in the pulldown menu to
enable the DHCP server on your router. Choose None to disable
this function.
Enter the starting and ending IP addresses for the DHCP server’s
IP assignment.
Note: If you statically (manually) assign IP addresses to your
computers or devices, make sure the IP addresses are outside of
this range or you may have an IP conflict.
The maximum length of time for the IP address lease. Enter the Lease time in minutes.
Enter the domain name.
Enter the IP address of the first DNS Server.
Enter the IP address of the second DNS Server, if there is one.
Enter the IP address of the third DNS Server, if there is one.
DHCP Mode:
IP Pool Range:
Max Lease Time:
Domain Name:
DNS Server 1:
DNS Server 2:
DNS Server 3:
Local Network
DHCP Server Settings
When you have finished configuring the new DHCP Server Settings, click the Apply Changes button.

Other manuals for D-Link GO-RT-N300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link GO-RT-N300 and is the answer not in the manual?

D-Link GO-RT-N300 Specifications

Wireless Signal Rates IconWireless Signal Rates
IEEE 802.11n 20MHz channel150 Mbps (max)
IEEE 802.11n 40MHz channel300 Mbps (max)
IEEE 802.11g rates54 Mbps - 48 Mbps - 36 Mbps - 24 Mbps - 18 Mbps - 12 Mbps - 11 Mbps - 9 Mbps - 6 Mbps
Operating Environment IconOperating Environment
operating temperature0 °C to 40 °C (32 °F to 104 °F)
storage temperature-20 °C to 65 °C (-4 °F to 149 °F)
humidity10% minimum to 95% maximum (non-condensing)
Dimensions IconDimensions
length160 mm (6.3 inches)
width120 mm (4.72 inches)
height59 mm (2.32 inches)

Related product manuals