Need help?Do you have a question about the D-Link G415 and is the answer not in the manual?
General| Brand | D-Link |
|---|---|
| Model | G415 |
| Category | Wireless Router |
| Language | English |
Provides initial setup considerations, including router placement and ISP information.
Outlines methods for setting up the router: EAGLE PRO AI app, Hardware Setup, Setup Wizard, and Manual Setup.
Guides through connecting the modem, powering up the router, and establishing initial connections.
Details the process of using the setup wizard, including browser access and agreeing to terms.
Explains how to select the correct internet connection type (DHCP, PPPoE, Static IP).
Covers setting the Wi-Fi network name, password, and admin password.
Explains automatic firmware updates and reviewing the summary of configured settings.
Describes saving the new settings and completing the router configuration process.
Introduces the router's home page, connection status, and navigation options.
Explains how to select connection types: Dynamic IP (DHCP), Static IP, and PPPoE.
Configure automatic IP address acquisition from ISP via DHCP.
Configures advanced options like Host Name, DNS Servers, MTU, and MAC Address Clone.
Configure static IP address, subnet mask, default gateway, and DNS servers.
Configure PPPoE username, password, reconnect mode, and idle time.
Lists IPv6 connection types: Auto Detection, Static IPv6, SLAAC/DHCPv6, PPPoE, and 6rd.
Configures DNS and local IPv6 address settings for SLAAC/DHCPv6.
Configures automatic IPv6 address assignment options like SLAAC and Stateful DHCPv6.
Configure static IPv6 address, subnet prefix length, gateway, and DNS servers.
Configure IPv6 PPPoE session details, including username, password, and address mode.
Manages Wi-Fi mesh networking and the Smart Connect feature for band optimization.
Configures advanced wireless settings like security mode, transmission power, and schedule.
Configures advanced settings specific to the 2.4GHz wireless band.
Configures advanced settings specific to the 5GHz wireless band.
Configures the router's local IP address and subnet mask.
Manages DHCP server settings including IP address range and lease time.
Optimizes network traffic and bandwidth allocation using speed tests and AI.
Addresses problems accessing the router's web-based configuration utility.
Explains how to reset the router to factory defaults if the password is forgotten.
To Next Page