D-Link G415 - Virtual Server Rule Parameters

74D-Link G415 User Manual
Section 3 - Conguration
Firewall Settings - IPv4/IPv6 Rules
To begin, use the drop-down menu to select whether it is an ALLOW or DENY rule. You can
also choose to turn ltering OFF.
If you want to remove a rule, click
in the Delete column. If you wish to edit a rule, click
in the Edit column. If you wish to create a new rule, click the Add Rule button.
Go to Features > Firewall, then click the IPv4 Rules tab or the IPv6 Rules tab to congure rules for ltering the inbound/
outbound trac based on parameters like IP address with ports.
To congure the Firewall Advanced settings, click the Advanced link. Refer to Firewall on page 72
Click Save at any time to save the changes you have made on this page.