D-Link G415 - Quick VPN

84D-Link G415 User Manual
Section 3 - Conguration
Quick VPN
Go to Features > Quick VPN. This page will help you congure the Quick VPN feature of your router. For more information,
refer to Quick VPN on page 111. Before proceeding, ensure that your Internet connection is working properly. We
recommend conguring Dynamic DNS before proceeding with Quick VPN setup. If your router is assigned an IP address
from your ISP using DHCP, it may frequently change, requiring connection parameters to be set accordingly and a DDNS
address can avoid this hassle.
To congure the User settings and grant users with VPN permission, go to Management > User. Refer to User on page
91.
Click Save at any time to save the changes you have made on this page.
L2TP over IPSec Enable or disable the Quick VPN server. Quick VPN uses L2TP
protocol.
Username Enter a username.
Password Enter a password containing both numbers and letters with
8 to 64 characters in length.
PSK Enter a Pre-shared Key between 6 and 64 characters.
VPN Prole for iOS
Device and MAC OS X
Click Export to save the VPN prole settings le for iOS devices
and Mac OS X.
Advanced Settings...
Authentication
Protocol
Choose the authentication protocol type: MSCHAPv2, PAP,
or CHAP. MSCHAPv2 is set as default.
MPPE Select the encryption cipher strength for Microsoft Point-to-
Point (MPPE) Encryption: None, RC4-40, or RC4-128. None
is set as default.