D-Link G415 - IPv4 - Dynamic IP (DHCP); Dynamic IP (DHCP) Settings

32D-Link G415 User Manual
Section 3 - Conguration
IPv4 - Dynamic IP (DHCP)
Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select
this option if your ISP does not specify an IP address to use. Click Save at any time to save the changes you have made on this
page.
Advanced Settings...
Host Name The host name is optional but may be required by some ISPs.
Leave it blank if you are not sure.
Primary DNS Server Enter the primary DNS server IP address assigned by your ISP.
This address is usually lled in automatically.
Secondary DNS Server Enter the secondary DNS server IP address assigned by your
ISP. This address is usually lled in automatically.
MTU Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your ISP. The default is 1500.
MAC Address Clone The default MAC address is set to the Internet port’s physical
interface MAC address on the router. You can replace the
Internet port’s MAC address with the MAC address of a
connected client.