D-Link G415 - Upgrade

92D-Link G415 User Manual
Section 3 - Conguration
Upgrade
Go to Management > Upgrade. This page allows you to upgrade the router’s rmware, either automatically or manually. To
manually upgrade the rmware, you must rst download the rmware le from http://support.dlink.com.
Click Save at any time to save the changes you have made on this page.
Firmware Information
Current Firmware
Version
Displays the current rmware version for both the main router
as well as the extenders.
Check for New
Firmware
Click this button to prompt the router to automatically check
for a new rmware version. If a newer version is found, it will
prompt you to install it.
Advanced Settings...Upgrade Manually
Device Name Select the device in the mesh network for manual update.
Select File If you wish to upgrade manually, rst download the rmware
le. Then, click the Select File button and locate the le to
install the new rmware.
Automatic Firmware Upgrade
Automatic Upgrade If enabled, the router will automatically upgrade to the newest
rmware. The system will automatically upgrade to the latest
rmware every day at 3:30-4:00 AM.
Choose Upgrade Time Enable this function to set the router to automatically upgrade
its rmware at a set time every day.
Upgrade Time Congurable if Choose Upgrade Time is enabled. Set the hour
and minute to automatically upgrade the router.