D-Link GO-RT-N300 - Configuration; Web-based Configuration Utility

12D-Link GO-RT-N300 User Manual
Section 3 - Conguration
Conguration
This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser such
as Internet Explorer and enter the IP address of the router
(192.168.0.1).
Enter Admin in the User Name field. Leave the password blank
as the default password.
If you get a Page Cannot be Displayed error, please refer to the
Troubleshooting section for assistance.