D-Link GO-RT-N300 User Manual

21D-Link GO-RT-N300 User Manual
Section 3 - Conguration
Internet Setup
Setup
This section allows you to manually configure your Router’s Internet WAN settings.
Select the WAN interface type.
If you choose DHCP Client, please configure the
following fields:
Enter the host name of the router.
Enter the MTU size.
Click this if the DNS is to be obtained automatically.
Click this to specify a DNS Server. You can enter up to three
DNS servers.
Select the MAC address to be used for the connection.
Select Default MAC to use the router’s MAC address.
Select MAC from PC to copy your PC’s MAC address, or
select MAC Manual to manually enter a MAC address in
the field provided.
WAN Access
Type:
Host Name:
MTU Size:
Attain DNS
Automatically:
Set DNS
Manually:
MAC Clone
When you have finished configuring the WAN settings, click the Apply Changes button.
GO-RT-N300

D-Link GO-RT-N300 Specifications

Wireless Signal Rates

IEEE 802.11n 20MHz channel	150 Mbps (max)
IEEE 802.11n 40MHz channel	300 Mbps (max)
IEEE 802.11g rates	54 Mbps - 48 Mbps - 36 Mbps - 24 Mbps - 18 Mbps - 12 Mbps - 11 Mbps - 9 Mbps - 6 Mbps

Operating Environment

operating temperature	0 °C to 40 °C (32 °F to 104 °F)
storage temperature	-20 °C to 65 °C (-4 °F to 149 °F)
humidity	10% minimum to 95% maximum (non-condensing)

Dimensions

length	160 mm (6.3 inches)
width	120 mm (4.72 inches)
height	59 mm (2.32 inches)