EasyManuals Logo

D-Link GO-RT-N300 User Manual

D-Link GO-RT-N300
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
63D-Link GO-RT-N300 User Manual
Section 5 - Connecting to a Wireless Network
Configure Wireless Security
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
2. Highlight the wireless network (SSID) you would like to connect
to and click Connect.
1. Open the Windows Vista
®
Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower right corner of
screen). Select Connect to a network.

Other manuals for D-Link GO-RT-N300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link GO-RT-N300 and is the answer not in the manual?

D-Link GO-RT-N300 Specifications

Wireless Signal Rates IconWireless Signal Rates
IEEE 802.11n 20MHz channel150 Mbps (max)
IEEE 802.11n 40MHz channel300 Mbps (max)
IEEE 802.11g rates54 Mbps - 48 Mbps - 36 Mbps - 24 Mbps - 18 Mbps - 12 Mbps - 11 Mbps - 9 Mbps - 6 Mbps
Operating Environment IconOperating Environment
operating temperature0 °C to 40 °C (32 °F to 104 °F)
storage temperature-20 °C to 65 °C (-4 °F to 149 °F)
humidity10% minimum to 95% maximum (non-condensing)
Dimensions IconDimensions
length160 mm (6.3 inches)
width120 mm (4.72 inches)
height59 mm (2.32 inches)

Related product manuals