D-Link GO-RT-N300 User Manual

17D-Link GO-RT-N300 User Manual
Section 3 - Conguration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Local Network
Use this section to configure the Router’s local network
settings.
Use this section to configure the GO-RT-N300’s built-in
DHCP server settings.
Use this section to add a new DHCP Static IP configuration.
Displays information about the devices that have a static
DHCP assigned from the GO-RT-N300. The information
includes the IP Address and MAC Address. You can delete
or edit an existing Static IP configuration in the table.
LAN Interface:
DHCP Server
Settings:
DHCP Static IP
Configuration:
DHCP Static IP
Table:

D-Link GO-RT-N300 Specifications

Wireless Signal Rates

IEEE 802.11n 20MHz channel	150 Mbps (max)
IEEE 802.11n 40MHz channel	300 Mbps (max)
IEEE 802.11g rates	54 Mbps - 48 Mbps - 36 Mbps - 24 Mbps - 18 Mbps - 12 Mbps - 11 Mbps - 9 Mbps - 6 Mbps

Operating Environment

operating temperature	0 °C to 40 °C (32 °F to 104 °F)
storage temperature	-20 °C to 65 °C (-4 °F to 149 °F)
humidity	10% minimum to 95% maximum (non-condensing)

Dimensions

length	160 mm (6.3 inches)
width	120 mm (4.72 inches)
height	59 mm (2.32 inches)