DestinationInterface=wan
DestinationNetworkExactly=all-nets
Web Interface
1. Go to Routing > Dynamic Routing Rules > Add > Dynamic routing policy rule
2. Specify a suitable name for the filter, for example ExportDefRoute
3. For From Routing Table select Main Routing Table
4. Choose wan for Destination Interface
5. Choose all-nets in the ...Exactly Matches list
6. Click OK
Next, create an OSPF Action that will export the filtered route to the specified OSPF AS:
Command-Line Interface
gw-world:/> cc DynamicRoutingRule ExportDefRoute
gw-world:/ExportDefRoute/> add DynamicRoutingRuleExportOSPF
ExportToProcess=as0
Web Interface
1. Go to Routing > Dynamic Routing Rules
2. Click on the newly created ExportDefRoute
3. Go to OSPF Action > Add > DynamicRoutingRuleExportOSPF
4. For Export to process choose as0
5. Click OK
4.5.3. Dynamic Routing Policy Chapter 4. Routing
164
To Next Page
Loading...
