problems in case a rule is preventing some other function, such as VPN tunnel establishment, from
working properly.
Example 6.1. Setting up an Access Rule
A rule is to be defined that ensures no traffic with a source address not within the lannet network is received on
the lan interface.
Command-Line Interface
gw-world:/> add Access Name=lan_Access Interface=lan
Network=lannet Action=Expect
Web Interface
1. Go to Rules > Access
2. Select Access Rule in the Add menu
3. Now enter:
• Name: lan_Access
• Action: Expect
• Interface: lan
• Network: lannet
4. Click OK
6.1.3. Access Rule Settings Chapter 6. Security Mechanisms
206
To Next Page
Loading...
