• Accept - Accept packet
• AcceptLog - Accept packet and log
• Rewrite - Rewrite to the MAC of the forwarding interface
• RewriteLog - Rewrite to the MAC of the forwarding interface and log
• Drop - Drop packets
• DropLog - Drop and log packets
Default: DropLog
Relay Spanning-tree BPDUs
When set to Ignore all incoming STP, RSTP and MSTP BPDUs are relayed to all transparent
interfaces in the same routing table, except the incoming interface. Options:
• Ignore - Let the packets pass but do not log
• Log - Let the packets pass and log the event
• Drop - Drop the packets
• DropLog - Drop packets log the event
Default: Drop
Relay MPLS
When set to Ignore all incoming MPLS packets are relayed in transparent mode. Options:
• Ignore - Let the packets pass but do not log
• Log - Let the packets pass and log the event
• Drop - Drop the packets
• DropLog - Drop packets log the event
Default: Drop
4.7.5. Advanced Settings for
Transparent Mode
Chapter 4. Routing
190
To Next Page
Loading...
