D-Link NetDefend DFL-210

1. Go to Rules > IP Rule Sets > main > Add > IP Rule
2. Enter:
• Name: Web_SLB_NAT
• Action: NAT
• Service: HTTP
• Source Interface: lan
• Source Network: lannet
• Destination Interface: core
• Destination Network: ip_ext
3. Click OK
E. Specify an Allow IP rule for the external clients:
1. Go to Rules > IP Rule Sets > main > Add > IP Rule
2. Enter:
• Name: Web_SLB_ALW
• Action: Allow
• Service: HTTP
• Source Interface: any
• Source Network: all-nets
• Destination Interface: core
• Destination Network: ip_ext
3. Click OK
10.4.6. SLB_SAT Rules Chapter 10. Traffic Management
432