D-Link Nuclias Connect DAP-3666

app from the App Store or Google Play
by searching for Nuclias Connect or by
scanning the QR code below.
2. Open the Nuclias Connect app and
follow the onscreen instructions to
discover and set up your device.
Manual Conguration
If you are not using Nuclias Connect,
you may manually congure the DAP-
3666 using its web user interface (UI).
Refer to the DAP-3666 User Manual for
detailed conguration instructions. Use
the following methods to access the web
user interface:
Note: The management computer must
be in the same subnet as the DAP-3666.
1. Use an Ethernet cable to connect the
management computer to the PoE switch
or to the PoE Injector the DAP-3666 is
connected to.
2. Open a web browser on the management
computer and type in dap3666.local in
theaddresseldandpress Enter.
3. When prompted, enter the default login
credentials:
User name: admin
Password: admin
TECHNICAL SUPPORT
dlink.com/support
6
D-Link DAP-3666 Quick Install Guide
ENGLISH