D-Link DNS-343 User Manual
18
5. The following screen allows you to choose your network type. 6. If your network is configured as a workgroup, click the Workgroup radio button.
Enter the Workgroup, Name and Description for your DNS-343, or leave the default
values. Click Next to continue.
7. If your DNS-343 will be connected to an Active Directory network, click the
Active Directory radio button. Enter the information about your Active Directory.
Click Next to continue.
8. When the wizard completes, click Back to go back and make changes or click
Completed to save the current settings.
To Next Page
Loading...
