D-Link DNS-343 User Manual
41
DHCP Server Page
The DNS-343 can be used as a DHCP Server. As a DHCP server, it can be used to
serve IP addresses to devices on your local network, however, this feature should not
be enabled if you already have a DHCP server, such as a router on your local network.
Enables or Disables the DNS-343 DHCP Server.
Enter the starting IP address for the range of addresses
assigned by the DHCP server.
Enter the ending IP address for the range of addresses
assigned by the DHCP server.
Sets the duration of time that an IP address will remain
assigned to a device.
DHCP Server:
Starting IP Address:
Ending IP Address:
Lease Time:
LLTD Page
The DNS-343 supports LLTD. LLTD stands for Link Layer Topology Discovery and is
used to discover network devices by the Network Map application that is included in
Windows Vista.
Click the Enable or Disable radio button to enable or disable the DNS-343 LLTD
service.
To Next Page
Loading...
Need help?
General
