EasyManuals Logo

D-Link Web Smart DES-1228P User Manual

D-Link Web Smart DES-1228P
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
4 SmartConsole Utility D-Link Web Smart Switch User Manual
SmartConsole Utility. When the device was detected not reachable, the icon will change to
. Please
check if the power or the cable of this device is disconnected.
IP Address: Shows the current IP addresses of devices.
MAC Address: Shows the device MAC Address.
Protocol version: Shows the version of the Utility protocol.
Product Name: Shows the device product name.
System Name: Shows the appointed device system name.
DHCP: Specify if the IP address of this device is from DHCP server or manual configured
Location: Shows where the appointed device location.
Trap IP: Shows the IP where the Trap information will be sent.
Subnet Mask: Shows the Subnet Mask setting of the device.
Gateway: Shows the Gateway setting of the device.
Device Group Interval: Shows the intervals (in seconds) that the Switch will be discovered in the
SmartConsole Device List
Firmware version: Show the current Firmware version of this device.
1
1
7
7

Table of Contents

Other manuals for D-Link Web Smart DES-1228P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Web Smart DES-1228P and is the answer not in the manual?

D-Link Web Smart DES-1228P Specifications

General IconGeneral
BrandD-Link
ModelWeb Smart DES-1228P
CategorySwitch
LanguageEnglish

Related product manuals