EasyManuals Logo

D-Link Wireless N Router DIR-615 User Manual

D-Link Wireless N Router DIR-615
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21D-Link DIR-615 User Manual
Section 3 - Configuration
Enter the IP address of the login server.
Enter your BigPond username.
Enter your BigPond password and then retype
the password in the next box.
Select the type of authentication server being
used.
The default MAC Address is set to the
Internet’s physical interface MAC address on
the Broadband Router. It is not recommended
that you change the default MAC address
unless required by your ISP. You can use the
Clone Your PC’s MAC Address button to
replace the Internet port’s MAC address with
the MAC address of your Ethernet card.
BigPond Server:
BigPond Username:
BigPond Password:
Auth Server:
MAC Address:
Internet Setup
Big Pond

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Wireless N Router DIR-615 and is the answer not in the manual?

D-Link Wireless N Router DIR-615 Specifications

General IconGeneral
Frequency Band2.4 GHz
LAN Ports4 x 10/100Mbps
WAN Ports1 x 10/100Mbps
Wireless SpeedUp to 300 Mbps
Antenna Gain5 dBi
FirewallNAT, SPI
Humidity10% to 90% non-condensing
Wireless StandardIEEE 802.11n
Antenna Type2 x External Antennas
SecurityWEP, WPA, WPA2, WPS
Operating Temperature0 to 40 °C
Storage Temperature-20 to 65 °C

Related product manuals