EasyManuals Logo

D-Link Wireless N Router DIR-615 User Manual

D-Link Wireless N Router DIR-615
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23D-Link DIR-615 User Manual
Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Network Settings
Enter the IP address of the router. The default IP
address is 192.168.0.1.
If you change the IP address, once you click Apply,
you will need to enter the new IP address in your
browser to get back into the configuration utility.
Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Enter the Domain name (Optional).
Uncheck the box to transfer the DNS server
information from your ISP to your computers. If
checked, your computers will use the router for a
DNS server.
IP Address:
Subnet Mask:
Local Domain:
Enable DNS Relay:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Wireless N Router DIR-615 and is the answer not in the manual?

D-Link Wireless N Router DIR-615 Specifications

General IconGeneral
Frequency Band2.4 GHz
LAN Ports4 x 10/100Mbps
WAN Ports1 x 10/100Mbps
Wireless SpeedUp to 300 Mbps
Antenna Gain5 dBi
FirewallNAT, SPI
Humidity10% to 90% non-condensing
Wireless StandardIEEE 802.11n
Antenna Type2 x External Antennas
SecurityWEP, WPA, WPA2, WPS
Operating Temperature0 to 40 °C
Storage Temperature-20 to 65 °C

Related product manuals