EasyManuals Logo

D-Link Wireless N Router DIR-615 User Manual

D-Link Wireless N Router DIR-615
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
43D-Link DIR-615 User Manual
Section 3 - Configuration
This page displays the current information for the DIR-615. It will display the LAN, WAN (Internet), Wireless information,
and the firmware version of the router.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be
displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
Displays the MAC address and the private (local)
IP settings for the router.
Displays the MAC address and the public IP
settings for the router.
Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
LAN:
WAN:
Wireless LAN:
Device Information

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Wireless N Router DIR-615 and is the answer not in the manual?

D-Link Wireless N Router DIR-615 Specifications

General IconGeneral
Frequency Band2.4 GHz
LAN Ports4 x 10/100Mbps
WAN Ports1 x 10/100Mbps
Wireless SpeedUp to 300 Mbps
Antenna Gain5 dBi
FirewallNAT, SPI
Humidity10% to 90% non-condensing
Wireless StandardIEEE 802.11n
Antenna Type2 x External Antennas
SecurityWEP, WPA, WPA2, WPS
Operating Temperature0 to 40 °C
Storage Temperature-20 to 65 °C

Related product manuals