EasyManuals Logo

D-Link Wireless N Router DIR-615 User Manual

D-Link Wireless N Router DIR-615
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
74D-Link DIR-615 User Manual
Appendix B - Networking Basics
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug
anything into the Internet port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless
network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and
Wireless Security sections for more information on setting up your wireless network.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Wireless N Router DIR-615 and is the answer not in the manual?

D-Link Wireless N Router DIR-615 Specifications

General IconGeneral
Frequency Band2.4 GHz
LAN Ports4 x 10/100Mbps
WAN Ports1 x 10/100Mbps
Wireless SpeedUp to 300 Mbps
Antenna Gain5 dBi
FirewallNAT, SPI
Humidity10% to 90% non-condensing
Wireless StandardIEEE 802.11n
Antenna Type2 x External Antennas
SecurityWEP, WPA, WPA2, WPS
Operating Temperature0 to 40 °C
Storage Temperature-20 to 65 °C

Related product manuals