EasyManuals Logo

Daavlin 4 Series User Manual

Default Icon
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
MNL-00007 [3] Proprietary and Confidential Page 16 of 63
The room that the device is placed in should be vented to allow free air displacement to
ensure the device and surroundings remain cool.
The device should be placed a minimum of 1 inch (2.5 cm) away from surrounding walls,
devices, and furniture to ensure proper cooling airflow.
A qualified, licensed electrician must wire the service for all devices in accordance with all
national and local codes and the electrical instructions provided in the accompanying Service
& Installation Instructions manual. Unauthorized personnel should not open the panels. The
Daavlin Service Department should be consulted before any service is performed.
14.0 Unlocking the Device
To prevent unauthorized use, the device will “self-lock” when left idle for twenty (20) minutes.
To unlock your unit, follow the instructions below.
1. Press any key to awaken your unit.
2. Your device will display the word “CODE”.
3. The factory preset key code is “0007”. Press the ▲ key seven times. Your unit will now
display “0007”.
4. Press the “ENTER” key to unlock your unit.
15.0 Changing or Disabling the Key Code
If you would like to disable or personalize your factory default key code, please contact the
Daavlin service department at 1-800-322-8546 for step by step instructions.
The Daavlin service department is available to assist you Monday through Thursday 7:30am-
8:00pm EST and Friday 8:30am-5:00pm EST.
16.0 Operating the Control Systems
Daavlin Flex controlled phototherapy equipment is available with two distinct control systems, a
Flex Timer and a Flex Dosimeter. Please verify the type of control system incorporated in your
unit and proceed to the applicable operating instructions.
17.0 Flex Dosimeter Instructions: UV Series, 7 Series, M Series, and
4 Series
Your Daavlin phototherapy unit features a built-in power meter that measures energy output.
Once a dose and backup time have been selected the unit will use the information gathered by
the sensor to determine the exact amount of time that each treatment will last. The dose is
entered in milliJoules for UVB and Joules for UVA.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Daavlin 4 Series and is the answer not in the manual?

Daavlin 4 Series Specifications

General IconGeneral
BrandDaavlin
Model4 Series
CategoryMedical Equipment
LanguageEnglish

Related product manuals