DAB E.SYBOX MINI - Pump and Motor Assembly Disassembly

Remove the pump body (you will
need the hammer and/or a flat
screwdriver)
Unscrew the three torx screws to
uncover the stages
NOTE: these three screws are
torx screws in E.sybox Mini 3,
while they are Phillips screws in
any previous E.sybox Mini model
To undo the top nut, keep the
shaft still with a flat screwdriver
from the bottom, and unscrew
the nut with the wrench (or vice
versa)
DISMANTLING
31
32
33
15