DAB evoplus SMALL User Manual

ISTRUZIONI PER L’INSTALLAZIONE E LA MANUTENZIONE
INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE
INSTRUCCIONES PARA LA INSTALACIÓN Y EL MANTENIMIENTO
INSTALLATIONS - OCH UNDERHÅLLSANVISNING
INSTRUCTIONS POUR L’INSTALLATION ET LA MAINTENANCE
INSTRUCTIES VOOR INGEBRUIKNAME EN ONDERHOUD
INSTRUCTIUNI DE INSTALARE SI INTRETINERE
INSTALLATIONSANWEISUNG UND WARTUNG
INSTRUKCJA MONTAŻU I KONSERWACJI
ΟΔΗΓΙΕΣ ΓΙΑ ΤΗΝ ΕΓΚΑΤΑΣΤΑΣΗ ΚΑΙ ΤΗ ΣΥΝΤΗΡΗΣΗ
NÁVOD NA POUŽITÍ A ÚDRŽBU
NÁVOD NA INŠTALÁCIU A ÚDRŽBU
MONTAJ VE BAKIM IÇIN BILGILER
UZSTĀDĪŠANAS UN TEHNISKĀS APKOPES ROKASGRĀMATA
MONTAVIMO IR TECHNINĖS PRIEŽIŪROS INSTRUKCIJOS
INSTRUÇÕES PARA A INSTALAÇAO
РУКОВОДСТВО ПО МОНТАЖУ И ТЕХНИЧЕСКОМУ ОБСЛУЖИВАНИЮ
ASENNUS- JA HUOLTO-OHJEET
NAVODILA ZA VGRADNJO IN UPORABO
ИНСТРУКЦИЯ ЗА ИНСТАЛИРАНЕ И ОБСЛУЖВАНЕ
HASZNÁLATI ÚTMUTATÓ A BEÁLLÍTÁSHOZ ÉS KARBANTARTÁSHOZ
V2.0
SMALL

DAB evoplus SMALL Specifications

General

Brand	DAB
Model	evoplus SMALL
Category	Water Pump
Language	English

Summary

General Information and Safety

General Safety Precautions

Ensure the electric system has safety precautions per country regulations.

Critical Safety Warnings

Warnings regarding power disconnection, capacitor charge, and earthing requirements.

Applications and Self-Protection Features

Technical Data and Specifications

Installation and Safety Procedures

Correct Installation Position

Rotation of Motor Heads

Electrical Connections and Safety

Power Supply Connection

Details on wiring the power supply cable and connecting it to the board.

Start-up Procedures

Functions and Regulating Modes

Control Panel Overview

Warning Lights

User Menus and Navigation

System Status and Settings Pages

Page 1.0: Factory Settings Reset

Page 2.0: Regulating Mode Selection

Page 3.0: Regulating Set-Point Modification

Alarms Log and Management

Alarm Recording and Display

Alarm Reset and Deletion

Factory Settings Overview

Types of Alarm

Alarm Codes and Descriptions

Details various alarm codes, their symbols, and descriptions.

Error Condition and Reset Procedures

Error Codes and Reset Actions

Provides reset procedures for specific error codes like internal errors.

Specific Error Handling

Low and High Mains Voltage Handling

Procedures for low (LP) and high (HP) mains voltage errors.

Electronic Parts Overheating

Action for critical overheating of electronic parts, checking ventilation.

Protection Against Overcurrent

Checks for free rotation and antifreeze percentage for overcurrent protection.

Voltage Error Handling

Steps to take for voltage errors, including checking mains voltage.

Dry Operation and Motor Overheating

Procedures for dry operation and motor excess temperature errors.

Energy Efficiency Index (EEI)