DAB e.sybox mini3 User Manual

ENGLISH
EN
38
INDEX
Key 41
Warnings 41
Responsibility 42
1.
General 42
1.1 Description of the Integrated Inverter 43
1.2 Integrated expansion vessel 43
1.3 Technical characteristics 44
2. Installation 45
2.1 Vertical Conguration 45
2.1.1 Hydraulic connections 46
2.1.2 Loading operation – Installation above head and below head 46
2.2 Horizontal Conguration 47
2.2.1 Hydraulic connections 47
2.2.2 Orientation of the interface panel 47
2.2.3 Loading operation – Installation above head and below head 48
3. Commissioning 49
3.1 Electrical connections 49
3.2 Conguration of the integrated inverter 50
3.3 Priming 50
4. The keypad and the display 51
4.1 Direct access with a combination of keys 52
4.2 Access by name with a drop-down menu 55
4.3 Structure of the menu pages 55
4.4 Blocking parameter setting by Password 56
4.5 Enabling and disabling the motor 56
5. Meaning of the individual parameters 57
5.1 User Menu 57
5.1.1 Status 57
5.1.2 RS: Rotation speed display 57
5.1.3 VP: Pressure display 57
5.1.4 VF: Flow display 57
5.1.5 PO: Absorbed power display 57
5.1.6 C1: Phase current display 57
5.1.7 SV: Supply voltage 57
5.1.8 SR: Supply range 57
5.1.9 TE: Dissipator temperature display 57
5.1.10 PKm: Pressure measured at suction 57
5.1.11 Operating hours and number of starts 57
5.1.12 PI: Power histogram 57
5.1.13 Output ow meter 58
5.1.14 VE: Version display 58
5.1.15 FF: Fault log display 58
5.2 Monitor Menu 58
5.2.1 CT: Display contrast 58
5.2.2 BK: Display brightness 58
5.2.3 TK: Backlight switch-on time 58
5.2.4 LA: Language 58
5.2.5 TE: Dissipator temperature display 58
5.3 Setpoint Menu 58
5.3.1 SP: Setting the setpoint pressure 59
5.4 Manual Menu 59
5.4.1 Status 59
5.4.2 RI: Speed setting 59
5.4.3 VP: Pressure display 59
5.4.4 VF: Flow display 59
5.4.5 PO: Absorbed power display 59
5.4.6 C1: Phase current display 59
5.4.7 RS: Rotation speed display 59
5.4.8 SV: Tupply voltage 60
5.4.9 SR: Supply range 60
5.4.10 TE: Dissipator temperature display 60
5.5 Installer Menu 60
5.5.1 RP: Setting the pressure fall to restart 60
5.5.2 OD: Type of plant 60
5.5.3 MS: Measuring system 60
5.5.4 AS: Association of devices 61
5.5.5 EK: Setting the low pressure function on suction 61
5.5.6 PK: Low pressure threshold on suction 61
5.5.7 T1: Low pressure delay (function detecting low pressure on suction) 61
5.6 Technical Assistance Menu 62
5.6.1 TB: Water lack blockage time 62
5.6.2 T2: Delay in switching off 62
5.6.3 GP: Proportional gain coefcient 62
5.6.4 GI: Integral gain coefcient 62
5.6.5 RM: Maximum speed 62
5.6.6 AY: Anti Cycling 62
5.6.7 AE: Enabling the anti-block function 62
5.6.8 AF: Enabling the anti-freeze function 62
5.7 Setting low pressure detection on suction
62
5.8 RF: Fault and warning reset 63
5.8.1 PW: Change password 63
6. Protection systems 63
6.1 Description of blockages 64
6.1.1 “BL” Anti Dry-Run (Protection against dry running) 64

DAB e.sybox mini3 Specifications

General

Brand	DAB
Model	e.sybox mini3
Category	Water Pump
Language	English