DAB FEKA VS User Manual

ISTRUZIONI PER L'INSTALLAZIONE E LA MANUTENZIONE (IT)
INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE (GB)
INSTRUCTIONS POUR L'INSTALLATION ET LA MAINTENANCE (FR)
INSTALLATIONS- UND WARTUNGSANLEITUNGEN (DE)
INSTRUCTIES VOOR INSTALLATIE EN ONDERHOUD (NL)
INSTRUCCIONES DE INSTALACIÓN Y MANTENIMIENTO (ES)
ΟΔΗΓΙΕΣ ΓΙΑ ΤΗΝ ΕΓΚΑΤΑΣΤΑΣΗ ΚΑΙ ΤΗ ΣΥΝΤΗΡΗΣΗ (GR)
ИНСТРУКЦИИ ПО МОНТАЖУ И ТЕХОБСЛУЖИВАНИЮ (RU)
INSTRUÇÕES PARA A INSTALAÇÃO E A MANUTENÇÃO (PT)
INSTALLATIONS- OCH UNDERHÅLLSANVISNINGV(SE)
INSTRUCTIUNI PENTRU INSTALARE SI INTRETINERE (RO)
رإادﺎﺷت ﺐﯿﻛﺮﺘﻟا ﺔﻧﺎﯿﺼﻟاو (AR)
FEKA VS GRINDER

DAB FEKA VS Specifications

General

Type	Submersible Pump
Power Supply	Electric
Material	Cast Iron
Impeller Type	Vortex
Protection Class	IP68
Maximum immersion depth	7 m
Insulation class	F
Voltage	230 V
Frequency	50 Hz
Application	Drainage, Sewage
Power	0.37 kW
Inlet/Outlet Size	1.5"

Summary

PUMPED LIQUIDS

Product description

Details the submersible pump's design for waste water, its compact size, and installation options.

Intended use

Explains the pump's single-stage submersible design and grinding system for waste water.

TECHNICAL DATA AND LIMITATIONS OF USE

WARNINGS

INSTALLATION

ELECTRICAL CONNECTION

CHECK THE DIRECTION OF ROTATION (FOR THREE-PHASE MOTORS)

START-UP

Adjusting the float switch

Details how to adjust the start and stop levels by modifying the float switch cable length.

PRECAUTIONS

MAINTENANCE AND CLEANING

Checking and changing seal oil

Procedure for checking and replacing the seal oil, including disposal instructions.

Changing the grinder

Refers to Fig.9 at the end of the booklet for instructions on changing the grinder.

Cleaning the impeller

Refers to Fig.10 at the end of the booklet for instructions on cleaning the impeller.

Adjusting the impeller clearance

Step-by-step guide on how to adjust the impeller clearance using fixing screws.

TROUBLESHOOTING