To Next PageTo Next PageHow to fix a DAB S4 Water Pump when the motor doesn't start?
If the motor of your DAB Water Pump doesn't start, check the fuses and restore any missing ones. Also, lower the pump level or wait for the natural restoration of the level in the well.
What to do if my DAB S4 motor is running but not delivering water?
If your DAB Water Pump motor is running but not delivering water, wait for the natural level to be restored or lower the level of the well. Install adequate protection against dry running. You can also replace the pump with one with suitable characteristics, invert two phase leads, or clean the pump, grid, or pipes.
What to do if motor protection is activated shortly after starting DAB Water Pump?
If the motor protection of your DAB Water Pump is activated shortly after starting, restore the missing phase, restore the protections, consulting the data plate or replacing the components concerned, or eliminate the cause of friction or clean the pump to remove any obstructions.
Why does the motor protection trip after long operation of DAB S4 Water Pump?
If the motor protection is tripped after long periods of apparently normal operation of your DAB Water Pump, restore the missing phase or eliminate the cause of friction or clean the pump to remove any obstructions.
General| Brand | DAB |
|---|---|
| Model | S4 |
| Category | Water Pump |
| Language | English |
Guidelines for storing the pump unit to prevent damage and maintain condition.
Instructions for careful handling and lifting of the electric pump unit.
Information on locating the total weight of the pump.
Checks and remedies for when the motor fails to start.
Checks and remedies for motor protection tripping shortly after starting.
Checks and remedies for protection tripping after periods of normal operation.
Checks and remedies for low flow rate during motor operation.
Checks and remedies for when the pump is running but not delivering fluid.
Checks and remedies for low pressure output from the pump.
Checks and remedies for the pump starting and stopping too frequently.
