DIGITAL INDICATOR
DN500N
32
7-4. PRINTER INTERFACE (Option 01)
It is a serial Interface method and this method can be used for the connection to all printers
communicated by this communication method. Print Format is programmed conforming to YJ-350(S/D,
S/T).
▶ Connector Pin Assignment
Pin No. Signal Description Division
1 NC STROBE Signal Output
2 RXD DATA input Input
3 TXD DATA output Output
4 NC - ”
5 GND GROUND Output
6 NC - ”
7 NC - ”
8 NC - ”
9 NC - ”
To Next Page
Loading...
