DIGITAL INDICATOR
DN500N
3
2. SPECIFICATION
2-1.ANALOGUE INPUT ＆ A/D CONVERSION
Input sensitivity 0.45㎶ / D
Zero adjustment Range - 0.6mV ∼ + 42.0mV
Load-cell impressed Voltage DC 10V (±5V)
Max signal input Voltage 32mV
Temperature coefficient
ZERO: ±20 PPM / ℃
SPAN: ±20 PPM / ℃
Input Noise ±0.6㎶ P.P
Input Impedance over 10㏁
A/D Conversion Method ∆∑
A/D Resolution 520,000 Count(19bit)
A/D Conversion rate 200times / Sec
Non-linearity 0.01% FS
2-2. DIGITAL PART
Display
element
Weight
7-Segment 6 digit RED FND
Size of letters: 20.0(H) ×13.0(W)mm
Value of 1 division ×1, ×2, ×5, ×10, ×20, ×50
Max display value +550000
Weight
Part
Display
Under Zero "-"Minus Sign
Status
Steady, Zero, Tare,
Gross, Auto
Green LED 3Ø Status Display 8 Lamp
K e y Number & Function Key
Number Key, Function Key
To Next Page
Loading...
