FoODSAVERTM STORAGE DRAWERS
To Remove FoodSaver TM Storage Drawers:
• Unload the drawer completely.
• Pull the drawer out until it stops.
• Lift front edge and pull all the way out.
To Reinstall FoodSaver TM Storage Drawers:
• Set drawer on side tracks.
AUTOMATIC HUMIDITY CONTROL
The FoodSaver TM drawers are equipped with Automatic Humidity
Control, eliminating the need for manual humidity slide controls.
A fabric-like material* covers small air vents in the drawer housing
above the crispers.This material controls the flow of moisture
vapor out of the crisper. If a food spill should occur on the air vent
or fabric-like material, wipe with a clean, damp cloth.
• Slide drawer in until the bar rests in slot on underside of drawer
front
Close the drawer.
* The Automatic Humidity Control system features a unique,
patented material called Shape Memory Polymer (SMP) that
when laminated to fabric, becomes DIAPLEX. DIAPLEX is
manufactured by Mitsubishi.
"the _nteHigent Texture
DOOR STORAGE
ADJUSTABLE DOOR BINS
(Fresh Food and Freezer)
DAIRY COMPARTMENT
(Fresh Food Compartment)
The door bins can be moved to best suit your storage needs.
To Remove:
• Lift the bin up until it clears the retainers on the door liner.
• Pull the bin straight out.
• Reverse this procedure to secure the bin into another position
on the door.
The dairy compartment, designed for storing spreadables such as
butter or margarine, can be moved to other locations on the fresh
food door.
To Move:
• Lift the compartment up until it clears the retainers on the door
liner.
• Pull the compartment straight out.
• Reverse this procedure to secure the compartment into another
position on the door.
To Next Page
Loading...
Need help?
General
