FRESH FOOD COMPARTMENT
SHELVES
The Fresh Food Compartment is equipped with adjustable
shelves.
CHEESE STORAGE DRAWER
To Remove:
• Unload the drawer completely.
• Pull the drawer out until it stops.
• Tilt the drawer up and pull it out.
The shelves feature a spill retainer edge.They also slide out for
easier access to items stored at the rear of the shelf.
To Reinstall:
• Slide the empty drawer bracket back on the track until the
bracket tab slips under the track "catch."
To slide out, grasp the front of the shelf and pull. Gently push in to
return the shelf back to its original position.
ADJUSTABLE SHELVES
• Hold on to the lower bar support.
To Remove or Adjust:
• Unload the shelf completely.
• Slightly tilt up the front and lift up
the rear of the shelf, then pull the
shelf straight out.
• Tilt the drawer front up, slide the drawer back into place (until
the bar rests in the slot at the bottom front of the drawer).
• Close the drawer.
To Lock the Shelf Into Another Position:
• Tilt up thefront edge of the shelf.
To Remove the Storage Drawer Frame:
• Remove drawer.
• Insert the hooks into the desired frame openings and let the
shelf settle into place.
• Be sure the shelf is securely locked at the rear. The
FoodSaver TM Top serves as the lower fresh food shelf.
To Remove the FoodSaverTM Top:
• Place hand under the frame to push up the glass Lift glass out
• Lift up the rear of the frame slightly.
• Pull the frame straight out
To Move the Storage Drawer Frame:
• Insert the rear hooks into the desired openings.
• Let the frame settle into place.
To Install:
• Repeat above instructions in reverse order
• Be sure the frame is level and securely locked at the rear
before putting the drawer back in.
To Next Page
Loading...
Need help?
General
