DAESUNG MAREF DTS-3000 - Control Panel and Button Functions

No Name Function
1
1CH
Pressure
Control
Button
Control of Pressure of 1CH
The previous setting is saved and displayed. The pressure
can be adjusted from 20 to 700mmHg depending on patient’s
status and application areas.
Set the pressure using the Pressure button ( , ).
Press for about 3 seconds. The pressure can be adjusted
during operation. (Unit : 5mmHg (Long push), 1mmHg (Short
push))
Furthermore, SET is displayed on the pressure value before
pressure is applied. SET is changed to RUN when pressure is
supplied and the current pressure value is displayed.
4-5. Names and Functions of Control Panel
126
115
104
93
82
71
13
14
21
UserManual_DTS-3000_170223_인증용.indd 21 2017-02-23 오후 2:06:06