2) Power Status
- Display the power status on the top of LCD.
3) Battery Status
- Display the battery status in four steps depending on the charging amount. The battery
is automatically charged when AC power is supplied.
* Disassembly and Replacement of Battery
- Open the battery cover at the back of the device and separate the connector
connected to the battery.
- For replacement of battery, contact the service center of your seller.
- The battery is consumable. The warranty for battery is 6 months from the date when
you purchase.
Full Charge
External power connection
Medium Charge
Charge Required
(Supply Power)
External power
Cutt-off
No Power
(Supply Power)
26
UserManual_DTS-3000_170223_인증용.indd 26 2017-02-23 오후 2:06:07
To Next Page
Loading...
