Daewoo COL1579 - Page 11

11
3 in 1 Portable Air Conditioner with Heating
Model No. COL1579
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Using Your Air Conditioning Unit
Cooling Mode
1. Power the unit up by pressing the Power ON/OFF Button (26).
2. Press the Mode Button (22) until the Cool Indicator (11) illuminates.
3. Press the Temperature/Time Up (24) and Temperature/Time Down (23) Buttons
to select the desired room temperature (16˚C - 31˚C) on the LED Display (15).
4. Press the Fan Speed Button (25) to choose either low, medium or high fan
speeds, the selected speed will be shown by the Fan Speed Indicators (17, 18 &
19).
To create a circulatory effect, the cooled air leaves the unit at an angle and
slightly to one side. This is to make space cooling more efficient and is quite normal.
Dehumidifying Mode
1. Power the unit up by pressing the Power ON/OFF Button (26).
2. Press the Mode Button (22) until the Dehumidify Indicator (14) illuminates.
The unit will automatically set the temperature to 2˚C below the room
temperature and the fan speed to low and begin dehumidifying.
The amount of water extracted from the atmosphere is approximately
1.2 litres an hour (28 litres a day).
Fan Only Mode
1. Power the unit up by pressing the Power ON/OFF Button (26).
2. Press the Mode Button (22) until the Fan Indicator (13) illuminates.
3. Press the Fan Speed Button (25) to choose either low, medium or high fan
speeds, the selected speed will be shown by the Fan Speed Indicators (17, 18 &
19).
Heating Mode
5. Power the unit up by pressing the Power ON/OFF Button (26).
6. Press the Mode Button (22) until the Heat Indicator (12) illuminates.
7. Press the Temperature/Time Up (24) and Temperature/Time Down (23)
Buttons to select the desired room temperature (16˚C - 31˚C) on the LED
Display (15).
8. Press the Fan Speed Button (25) to choose either low, medium or high fan
speeds, the selected speed will be shown by the Fan Speed Indicators (17, 18 &
19).
Using the Timer – Timer ON Setting
1. When the unit is OFF i.e., not powered up but plugged into the mains, press the
Timer Button (21), the Timer button will illuminate to show the unit is in TIMER
mode.