<Assembly>
1) Wipe the fuel filter mounting face with clean rag to
install a new filter.
2) Lightly oil the O-ring part.
3) Inject fuel to the new fileter to be easily discharged
an air.
4) Turn the new fuel filter until the sealing face is filted
against the O-ring.
5) Additionally tighten the fuel filter by 3/4 of one turn.
EJM1022I
- 14 -
¥ Removal
<Remover and Installer>
1) Remove filter as turning it counterclock wise.
2) Do not reuse the used filter.
¥ Assembly
1) Wipe the oil filter mounting face with a clean rag to
install a new filter.
2) Lightly oil the O-ring part.
3) Turn the new oil filter until the sealing face is fitted
against the O-ring.
4) Additionally tighten the oil filter by 3/4 of one turn.
5) Check the engine oil level and replenish to the
specified level if necessary.
6) Check the leakage at the replaced filter as
operating the engine.
EJM1019I
<Downword type>
1.5. Maintenance
1.5.1. Replacement of Oil Filter
Cartridge (Spin-On) Type
<Removal>
1) Remove the filter as turning it counterclock wise.
2) Do not reuse the used filter.
1.5.2. Replacement of Fuel Filter
Head
Cartridge