- 58 -
¥
Valve Stem Oil Seal
1) Spread the engine oil to oil seal and the assembled
part.
2) Assemble the valve stem oil seal.
¥
Intake and Exhaust Valves
1) Put the cylinder head on plate.
2) Spread the engine oil to valve stem.
3) Assemble valves in guicle.
¥
Spring of Intake and Exhaust Vavle
Assemble the valve spring of which painted direction
is toward bottom.
¥
Spring Seat Split Pin
1) Assemble the split pin with the spring compressor.
2) After assembling split pin, completely assemble
split pin with the rubber hammer.
EJM2109S
EJM2110S
EJM2111I
EJM2112S
EJM2113S
jig
Painted parts
Spring Compressor
To Next Page
Loading...
