Daewoo DLT-26C2 - Page 29

29
PR/PAGE
SELECT
PR/PAGE
PR/PAGE
SELECT
PR/PAGE
PR/PAGE
SELECT
PR/PAGE
AUTO TUNING
MANUAL TUNING
SETUP
EDIT
POSITION ACCESS EXIT
INSTALL
PROGRAM
CHANNEL C 2
NAME – – – –
SYSTEM PAL
SOUND BG
FINE TUNING 0
POSITION ACCESS EXIT
INSTALL
PROGRAM
CHANNEL C 2
NAME – – – –
SYSTEM PAL
SOUND BG
FINE TUNING +2
POSITION ACCESS EXIT
INSTALL
Setting Up TV
Stations
Setup
The Setup menu shows you information as follows:
- Picture information: PAL, SECAM, and SECAM-L
- Sound information: L, DK3, DK2, DK1, I, BG
- Station name, Program number and Real channel number.
1. Searching for channels in the Setup menu
• Press the “PR“ buttons to select a program number you
want.
• Move to SETUP in the Install menu.
• Select the colour and sound system which you want.
• Search a real channel with “/“ buttons.
2. Enter a station name
• Move to SETUP in the Install menu.
• Move the cursor to name by pressing “/” buttons.
• You can enter a station name with the “/” and “/” but-
tons.
Note : Only English is supported in this station name.
3. Fine tuning
• Move to SETUP in the Install menu.
• Move the cursor to Fine Tuning by pressing “/” buttons.
• Adjust the fine tuning with the “/” buttons.
Note :
• If you are unable to get a good picture or Sound because of a
poor broadcasting signal, adjustment of the fine tuning might
improve it.