42
PICTURE MODE NORMAL I
PICTURE MODE NORMAL II
PICTURE MODE FAVOURITE
Screen Adjustment
When setting up various screen modes
- The user may select various screens designed for a good picture without adjusting the brightness, contrast or col-
our individually.
1. Pressing the “NORMAL” button.
• The screen changes as follows:
Normal I => Normal II => Favourite => Normal I
• The screen adjustment status changes as the following screens
are displayed sequentially whenever pressing the “NORMAL” button.
• The screen returns to the mode prior to turning power off
when you power on again.
Note :
• Normal I : For a highly defined image in a normally bright room.
• Normal II : Supports softer image than Normal I.
• Favourite : Allows the user to customize settings as desired.
To Next Page
Loading...
Need help?
General
