Daewoo DPP-32F1BMB - Page 33

-33-
Trouble Shooting
9-3. Shut Down
Check Start
Disconnect AC power
Open BACK COVER
Disconnect P812 and P814
of Power PCB
Connect AC power (Stand By)
Turn on the set (Green LED)
Disconnect AC power
Connect P814
Connect AC power (Stand By)
Turn on the set(Green LED)
Replace POWER PCB
Replace MainPCB
Is ’SHUT DOWN’ occurred?
Go to ’PDP Module
Shut Down’ part in
this trouble shooting
NY
Is ’SHUT DOWN’ occurred?
NY