Daewoo DSB-092A - Page 21

20
* DSB-092A/092AH
■ Remote Control Signal Receiver
This place is the part to receive the signal if it
receives the signal, you can hear the signal
“beep. “beep. beep.”
■ There is a switch panel at inside of Front
Panel. At the time of operating, open the
Front Panel.
Emergency switch can be used when the remote
controller is lost or Testing.
Remote switch is usually used by remote
controller.
Indoor Unit Display Switch Panel
Timer (Yellow)
Lights during the time
reservation mode.
Quick (Red)
ON (Red)
Lights when the
operation is going on.
Air clean (Green)
EMR. REMOCON