10
CELSIUS TO FAHRENHEIT CONVERSION CHART
CELSIUS FAHRENHEIT
18 64.4
19 66.2
20 68
21 69.8
22 71.6
23 73.4
24 75.2
25 77
CELSIUS FAHRENHEIT
26 78.8
27 80.6
28 82.4
29 84.2
30 86
31 87.8
32 89.6
NOTES:
• When operating the remote controller, make sure there are no obstructions between the remote controller
and the remote sensor.
• After a while the display goes blank to conserve battery power. To check the settings, press the ON/OFF
button once.
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the remote display.
2.Make sure the AUTO indicator appears in the
remote display. Using the TEMP. ▼ or ▲ buttons, set
the desired temperature. The desired temperature can
be changed up or down 1 degree from the actual
room temperature. For temperature setting: 24~28°C
3.Then the unit will automatically operate.
TO SET AUTO MODE
This unit will automatically operate the unit according to its surroundings while in the Auto mode. All you have to set is
the desired temperature and it will control the fan, coolness and dehumidifier. Follow procedures below:
To Next Page
Loading...
