EasyManua.ls Logo

Daewoo DSD600 - Battery Charging; Battery Charger Specifications

Daewoo DSD600
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
EN
and keep the solid-liquid separation basket clean.
Battery charging
Note: In order to extend the life of the battery and ensure the best
performance of the machine, the battery must be charged after
the machine has been used for at least 30 minutes.Do not leave
the battery uncharged for a long time. The following charging
instructions apply to this product.
Please be sure to use the charger with the following
specications for the charger provided with the machine to avoid
battery damage.
Battery charger specications:
- Charger type - lead-acid battery charger
- Output voltage - 24V
- Output current - 15A
- Automatic power off circuit
- Suitable for deep cycle battery charging
- Move the machine to a well-ventilated area to charge.
WARNING:
1.Fire or explosion hazard. The battery releases hydrogen gas.
Please keep away from sparks or open re sources. The battery
compartment must be kept open when charging.
2.Park the machine on level ground and turn the key to the off
position.
3.Before charging, check the electrolyte level in each battery unit.
For safety: When servicing the machine, please wear protective
gloves and eye protection when handling the battery and battery
wiring.
Avoid contact with battery uid acid.
4.When charging, please open the waste water tank sideways to