14
Chapter 3 : Operating Your TV
Changing Channels
You can change channels in three ways:
1.
The
xx
CH
yy
buttons will take you through all memorized
channels, one by one. The
xx
CH
yy
buttons will not access chan-
nels that have not been programmed into the TV's memory. For
more information about programming channels into memory,
see the section “Programming your TV/VCR's Channel
Memory” on the previous page.
2.
The number buttons (0-9) will take you to any channel, even if it
has not been memorized. To change to a channel, enter its num-
ber; the TV/VCR will tune to the new channel when you enter
the second digit of the channel.
3.
The FAVORITE CH button will take you instantly to the last
channel you were watching.
Changing the Volume
1.
To change the volume of the TV/VCR set, use the
CC
VOL
BB
but-
tons on the remote or on the front panel.
2.
To quickly turn off the sound, press the MUTE button on the
remote. The ‘MUTE’ will appear on screen, colored red. To
return the volume to its previous level, press MUTE again.
To Next Page
Loading...
Need help?
General
