11
Chapter 2 : Connecting an Antenna or Cable to Your TV/VCR
Connecting a Cable System
If your cable set-up is not described below, please contact your cable company for more infor-
mation.
If your cable system does not require the use of a
cable box, simply press or screw the incoming cable
onto the antenna terminal on the back your TV.
If your cable system requires you to use a converter box for all channels, connect the
incoming cable to the IN terminal on the converter box. Connect another cable between the
OUT terminal on the converter box and the antenna terminal on the TV. You will need to
keep your TV tuned to channel 3 or 4 and change channels using the converter box.
To Next Page
Loading...
