Duplicating a Video Tape
Because your TV/VCR has audio and video inputs, it is easy to make a copy of a tape, if you
have another VCR or Video Camera. Follow these instructions :
1. Connect a audio cable from the AUDIO OUT jack on the VCR to the AUDIO jack on the
front of your TV/VCR.
2. Connect a video cable from the VIDEO OUT jack on the VCR to the VIDEO jack on the
front of your TV/VCR.
3. Press TV/LINE button on the remote control to set the TV/VCR to “LINE”.
4. Insert the tape on which you want to record in the TV/VCR and set it to the point at which
you want to begin recording.
5. Insert the tape from which you want to record in the VCR and set it to the point at which
you want to begin recording.
6. Press the REC/OTR button on the reomote control or REC button on the TV/VCR.
7. Press the PLAY button on the VCR.
8. When you are finished recording, press the STOP button on both the TV/VCR and the
VCR.
41
Chapter 7 : Additional VCR Features
To Next Page
Loading...
Need help?
General
