Daewoo DVQ 9H1FC - Page 41

Chapter 7 : Additional VCR Features
36
10.Press the VOLB button, then the cursor(B) appears at the left margin
11.When you want to set other program, the CHy button to move the cursor(B) to next line,
then repeat step 2 through 10.
12.Press MENU to Exit the “Program” menu.
13.Press POWER to turn off the TV/VCR.
The REC lamp on the front of the TV/VCR lights up to Green and the TV/VCR enters
recording stand-by mode.
The TV/VCR turn on automatically and start recording at the preset start time, and the
REC lamp on the front of the TV/VCR changed from Green to Red.
Adjust Select Exit
7
Adjust Select Exit
8
Adjust Select Exit
9-1
Adjust Select Exit
9-2
Program
Program
Program
Program
Select Enter Next
10
Select Enter Next
11 12
Program Program