Washing procedure and program selection (cont.)
NOTE
• If you want to change the setting during operation, press the Start/Pause button to hold the operation and press
the button you want.
• Only ‘Cold’, ‘20’°C’, ‘40’°C’ washing temperatures is selectable with Wool program.
• The rpm of spin velocity is not selectable with Wool program is order to protect damage on laundry.
• The appropriate amount of laundry for Wool program is below 3.0kg.
• Use only special detergent for wool.
(Since special neutral detergent for wool creates a lot of bubbles, use appropriate amount).
1
Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
• Put detergent into the main wash compartment in the detergent case.
Softener should be below the ‘MAX’ level.
• When you want to use bleach, put it into the main wash compartment with
detergent.
2
Press the Power button.
• The LED shows only ‘- --’ and all Program Lights turn on.
3
Select the ‘Wool’ program using program selection dial.
• Washing temperature ‘20’ °C, spin ‘400’ rpm are selected automatically.
4
Press Start/Pause button.
• The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
* WOOL PROGRAM
To Next Page
Loading...
