Washing procedure and program selection (cont.)
NOTE
• All programs are not selectable with Quick Wash program is below 1kg.
• The Quick Wash is not precise 15 minutes washing.
Depending on clothing load weight, rinsing, spin dry and clothing balancing factor, the washing time may extend
longer and is not a fault of the washing machine.
• Only ‘Cold’ washing temperatures is selectable with Quick Wash Program.
1
Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
• Put detergent into the main wash compartment in the detergent case. Softener
should be below the ‘MAX’ level.
• When you want to use bleach, put it into the main wash compartment with
detergent.
2
Press the Power button.
• The LED shows only ‘- --’ and all Program Lights turn on.
3
Select the ‘Quick wash’ program using program selection dial.
• Washing temperature ‘Cold’, spin ‘800’ rpm are selected automatically.
4
Press Start/Pause button.
• The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
* QUICK WASH PROGRAM
To Next Page
Loading...
