S
Samuel DixonAug 29, 2025
How to fix E9 SENSOR PRESSURE ERROR on Daewoo Washer?
- JJamie HarrisAug 29, 2025
To resolve the E9 SENSOR PRESSURE ERROR on your Daewoo Washer, you should change the water level sensor.
To Next PageTo Next PageHow to fix E9 SENSOR PRESSURE ERROR on Daewoo Washer?
To resolve the E9 SENSOR PRESSURE ERROR on your Daewoo Washer, you should change the water level sensor.
How to fix H5 WATER TEMP. ERROR on Daewoo DWD-F1011?
To resolve the H5 WATER TEMP. ERROR on your Daewoo Washer, you should change the thermistor wash.
How to fix PFE PUMP FILTER ERROR on Daewoo DWD-F1011 Washer?
To resolve the PFE PUMP FILTER ERROR on your Daewoo Washer, clean the drain pump filter. If problems persist you should change the drain pump. Also use the proper amount of detergent and place the drain hose 1m below the floor.
Why does my Daewoo DWD-F1011 show a water inlet error?
A water inlet error on your Daewoo Washer can occur for several reasons: * The water tap might be closed; in this case, open the water tap. * The filter of the valve inlet could be clogged; clean the filter. * The valve inlet or the water level sensor might be defective, requiring replacement. * The drain motor may be running during water supply, also requiring replacement. * The PCB ASS’Y might not be checking the water level, also requiring replacement.
What to do if my Daewoo DWD-F1011 Washer shows a door open error?
If your Daewoo Washer displays a door open error, make sure the door is fully closed. If the Start/Hold button was pressed while the door was open, simply close the door. If the error persists, the switch door lock may be defective and need to be replaced. It's also possible that the PCB ASS’Y is not checking the door lock, and would also require replacement.
How to fix a Daewoo DWD-F1011 when the water drains slowly?
If the water in your Daewoo washer isn't draining properly or drains slowly, check the drain hose for kinks or clogs and clean and straighten it. Also, inspect the drain filter for clogs and clean it.
Why is my Daewoo Washer leaking water?
If your Daewoo washer is leaking water, check the inlet and drain hoses for looseness at both the tap and washer connections. Tighten these connections if needed. Also, inspect your house drain pipes for clogs; unclog them yourself, or contact a plumber if necessary.
Why won't my Daewoo Washer spin?
If your Daewoo washer isn't spinning, make sure the door is firmly shut. Close the door properly and press the Start/Pause button. Note that it may take a few moments after pressing Start/Pause before the washer begins to spin, as the door must lock first.
Why does my Daewoo DWD-F1011 make a thumping sound?
A heavy wash load may produce a thumping sound in your Daewoo washer, which is usually normal. However, if the sound persists, it may indicate that the wash load is out of balance. Stop the washer and rearrange the wash load.
How to stop rattling noise in Daewoo DWD-F1011 Washer?
If your Daewoo washer is making a rattling or clanking noise, there might be foreign objects, such as coins or safety pins, in the drum or pump. Stop the washer and check both the drum and the filter for any foreign objects.
General| Loading type | Front loading |
|---|---|
| Capacity | 6 kg |
| Washing capacity | 6 kg |
| Maximum spin speed | 1000 RPM |
| Dimensions (H x W x D) | 85 cm x 60 cm x 55 cm |
| Noise Level (Washing/Spinning) | 58 dB / 76 dB |
| Color | White |
| Type | Washer |
| Water Consumption | 49 L |
List of accessories included with the washing machine, such as hose, spanner, manual.
User's duties regarding safe operation, maintenance, and avoiding hazards.
Step-by-step guide to remove shipping bolts before operation.
Guidance on choosing a suitable installation site and spacing.
Instructions for connecting the water inlet hose to a standard tap.
Instructions for connecting the water inlet hose to a screw-type tap.
Details on connecting the drain hose and its placement requirements.
Instructions for adjusting the machine's legs for stability.
Tips on preparing laundry items to prevent damage and ensure effective washing.
Default program settings when the washer is powered on.
Steps for manually selecting washing courses and conditions.
Instructions for setting a delayed start time for washing.